Heated Towel Rails are an affordable luxury for every bathroom for warming and drying your towels. The SRB69M Heated Towel Rail is a 700x1200 10 bar rail ideally sized to fit two to three towels. The brushed stainless finish is very similar to a brushed nickel finish and can be used to compliment your brushed nickel tapware.

The SRB69M towel heater features multiflexing wiring. This means that you have a connection point on the right or left-hand side of the rail, this would be typically at the bottom but the rail can be flipped so that it is at the top and provides the option of hardwired or plugin, all as standard out of the box.

The electric towel rail is designed to rapidly heat up and reach a temperature of around 45-55 degrees. The rail can be operated using an on/off switch however we recommend using a timer to allow you to set and forget and control your running costs. As the rail is electric it is very energy efficient and can cost as little as a $1 a week to run.

Product Features:

• Brushed Stainless Steel Finish
• Output - 128Watts
• IP Rating - IP55
• Warranty - 7 Years
• Lead Length - 1.8m
• Voltage - 240Volt
• Number of Bars - 10
• Wiring Type - Multiflex - Concealed (Hardwired) or Exposed (Plugin)
• Wiring Position - Any of the four Mounting Positions
• Distance Between Mounting Points (Top to Bottom) - 1000mm
• Distance Between Mounting Points (Left to Right) - 668mm
• See specification sheet for installation guide